Penetrating Tung Oil, Natural Matt Finish.
*Previously known as China Wood Oil
Containing pure tung oil that has been prepared to the perfect consistency for coating interior timber, Feast Watson Tung Oil penetrates deeply to nourish timber resulting in a natural matt finish that can be burnished or waxed if desired.
It’s quick and easy to apply, and regular maintenance coats can be added very simply, without the need for sanding. Tung Oil is resistant to water and spills and once applied, is very easy to maintain
Tung Oil can be burnished or waxed if desired and is suitable for use on all interior timber including bench tops, panelling, furniture, architraves, doors and trim.
Note: If staining of the timber is desired we recommend soft porous timber is sealed with one coat of Tung Oil prior to staining and that a blend of Tung Oil and Prooftint (up to 10%) is used to stain the timber.
New or Bare Timber/Cork
Punch exposed nails below the surface. Note that holes and imperfections should be filled with timber putty after the first coat of Tung Oil to match the putty colour with the coated timber colour. Sand timber to an even, smooth surface. Vacuum and wipe to remove dust.
Previously Coated Surfaces
Clean surface with Feast Watson Floorclean and allow to dry. Previous polyurethane coatings or varnishes need to be removed by sanding surface back to bare timber. Previous coatings of Tung Oil can be recoated without resanding.
Surfaces to be coated must be dry and free from all dirt, dust, grease, wax, polish and oil.
Tung Oil should be stirred thoroughly before and during application with a flat blade stirrer taking care not to introduce bubbles.
Apply a liberal coat of Tung Oil to the timber with a brush, roller, cloth or Feast Watson Floor Finish Applicator. Ensure the surface is evenly covered. Leave the Tung Oil to soak into timber for approximately 60 minutes and then wipe off any excess product with a clean cloth.
When the first coat is thoroughly dry, apply a second coat of Tung Oil following the application process outlined above.
When applying Tung Oil to floors, buff the floor after the final coat using a buffing machine (300 revs/minute). Allow 24 hours before buffing.
Allow Tung Oil to cure for a minimum of 4 weeks before polishing. Regularly clean floors using Floorclean.
When surface requires an additional coat, clean with Floorclean and apply one coat of Tung Oil as per application directions.