Attain a traditional, classic finish to your interior timber with Feast Watson Fine Buffing Oil.
Fine Buffing Oil not only protects your timber but can be used to restore your beautiful gloss or satin timber to its original glory.
With a special blend of penetrating Tung oil with hard-drying beeswax and carnauba wax, the Fine Buffing Oil can be applied and then buffed to achieve a sophisticated, classic rubbed finish.
Sand your timber back to a smooth surface. Remember to remove all dust before coating!
Although Fine Buffing Oil can be applied directly to raw timber, we recommend the timber to be sealed for the best results. This can be done with Feast Watson Proofseal.
Do you want that super-smooth finish? Or is the timber grain open or coarse? Just apply a coat of Feast Watson Sanding Sealer and sand back as per the directions.
Previously Coated Timber
Ensure your surface is clean with a suitable liquid floor cleaner and allow to dry.
How to apply Feast Watson Fine Buffing Oil:
Ensure your surface is completely dry and free from all dirt, dust, grease, wax, and oil.
Using a nylon scouring pad or fine steel wool (000), apply Fine Buffing Oil.
Note: For soft timbers such as pine, apply using a soft cloth.
Apply in the direction of the grain.
Allow Fine Buffing Oil to penetrate 10 - 20 minutes and go make yourself a coffee! When you come back, check if the surface is tacky. If so, wipe vigorously with a coarse cloth.
Leave for approximately 5 hours, then buff surface with a soft, clean cloth.
If you are looking for an increased level of sheen or glow, repeat the process by using a soft cloth to apply the Fine Buffing Oil.
How to maintain my timber after using the Fine Buffing Oil:
Always keep an eye on your timber.
If you feel it needs a rejuvenation, wash with sugar soap and water or Mineral Turpentine and a scouring pad. Then reapply Fine Buffing Oil as outlined in the application directions.
Sand your timber back to a smooth surface. Remember to remove all dust before coating!
Although Fine Buffing Oil can be applied directly to raw timber, we recommend the timber to be sealed for the best results. This can be done with Feast Watson Proofseal.
Do you want that super-smooth finish? Or is the timber grain open or coarse? Just apply a coat of Feast Watson Sanding Sealer and sand back as per the directions.
Previously Coated Timber
Ensure your surface is clean with a suitable liquid floor cleaner and allow to dry.
Ensure your surface is completely dry and free from all dirt, dust, grease, wax, and oil.
Using a nylon scouring pad or fine steel wool (000), apply Fine Buffing Oil.
Note: For soft timbers such as pine, apply using a soft cloth.
Apply in the direction of the grain.
Allow Fine Buffing Oil to penetrate 10 - 20 minutes and go make yourself a coffee! When you come back, check if the surface is tacky. If so, wipe vigorously with a coarse cloth.
Leave for approximately 5 hours, then buff surface with a soft, clean cloth.
If you are looking for an increased level of sheen or glow, repeat the process by using a soft cloth to apply the Fine Buffing Oil.
How to maintain my timber after using the Fine Buffing Oil:
Always keep an eye on your timber.
If you feel it needs a rejuvenation, wash with sugar soap and water or Mineral Turpentine and a scouring pad. Then reapply Fine Buffing Oil as outlined in the application directions.
This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.
