Prooftint Colour Reducer
Achieve that lighter, brighter feel to your timber with the Prooftint Colour Reducer.
Used with Prooftint, this specially formulated dilution base product creates the understated, light, subtle finish you are looking for.
Prooftint Colour Reducer can also be used to help distribute the stain, ensuring you have a consistent, even finish to your large flooring areas.
This product could be the key to your stunning new timber finish.
WHERE TO USE
Prooftint Colour Reducer enables the creation of lighter, more subtle timber shades. When staining larger projects and floors, dilute Prooftint in Colour Reducer to get more working time and to distribute the stain evenly.
RECOAT TIME
Recoat after 1 hour
DRY TIME
30 minutes if product is applied straight
CLEAN UP
Methylated Spirits
MIX RATIO
Prooftint Colour Reducer can be mixed with Prooftint at any ratio to achieve the desired colour strength. 1 part Prooftint mixed with 1 part Colour Reducer will provide approx. half the colour strength of Prooftint undiluted (neat).
How to prepare Feast Watson Prooftint Colour Reducer:
Prepare new and previously coated timber as per the directions for Prooftint.
How to achieve your perfect colour match:
Add Prooftint to Prooftint Colour Reducer at the required mixing ratio to achieve your beautiful colour.
Make sure your stir well and apply the Prooftint application instructions.
Check that you love your colour! Test the colour on an off cut or an inconspicuous area before beginning to check this is the colour your desired.
Note : The dwell time before wiping excess and the finishing clear coat will impact the final colour.
For Small Areas
Apply Prooftint and Color Reducer mixture directly onto the surface in the direction of the grain, by either brush or rag.
After making a coffee (2-5 minutes), wipe the product off depending on the colour you desire.
Allow to dry, then seal with Feast Watson Clear Varnish.
For Large Areas
Dilute Prooftint in Prooftint Colour Reducer which will give more working time to distribute the stain evenly.
Using a rag, brush, or Feast Watson Floor Finish Applicator, apply the product in the direction of the grain.
Once you can see your desired colour, wipe off excess.
Allow to dry, then seal with a suitable flooring polyurethane.
How to prepare Feast Watson Prooftint Colour Reducer:
Prepare new and previously coated timber as per the directions for Prooftint.
How to achieve your perfect colour match:
Add Prooftint to Prooftint Colour Reducer at the required mixing ratio to achieve your beautiful colour.
Make sure your stir well and apply the Prooftint application instructions.
Check that you love your colour! Test the colour on an off cut or an inconspicuous area before beginning to check this is the colour your desired.
Note : The dwell time before wiping excess and the finishing clear coat will impact the final colour.
For Small Areas
Apply Prooftint and Color Reducer mixture directly onto the surface in the direction of the grain, by either brush or rag.
After making a coffee (2-5 minutes), wipe the product off depending on the colour you desire.
Allow to dry, then seal with Feast Watson Clear Varnish.
For Large Areas
Dilute Prooftint in Prooftint Colour Reducer which will give more working time to distribute the stain evenly.
Using a rag, brush, or Feast Watson Floor Finish Applicator, apply the product in the direction of the grain.
Once you can see your desired colour, wipe off excess.
Allow to dry, then seal with a suitable flooring polyurethane.
This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.
Accept & Close
