Wet Look Decking Oil

Get that newly renovated glow with our Wet Look Decking Oil.

Bring your deck to life with a natural, 'wet-look' gloss finish with an easy-to-use water wash-up, low odour, and fast drying product. Our Wet Look Decking Oil provides that glossy, beautiful finish to your outdoor area.

Our 'Natural' colour can bring that perfect hue match to your space, all finished with an elegant and deluxe polish and gloss transforming your outdoor space.

Plus, with UV protection, you can walk out to a luxurious and stunning deck every day with the Wet Look Decking Oil.

Safety Data Sheet

Find a stockist

WHERE TO USE

Decking, timber walkways, outdoor furniture, pergolas, steps, rails, fences, gates, and all other exterior timber.

COVERAGE RATE

8m² per Litre

NUMBER OF COATS

Bare Timber: 2
Maintenance: 1

RECOAT TIME

Recoat after 4 hours

DRY TIME

Light foot traffic - 12 hours.
Full curing in 7 days.

CLEAN UP

Water

SIZES

250ml, 4L, 10L

How to prepare your deck for the Wet Look Decking Oil:

New Timber

Allow your new timber to weather for 4-6 weeks before applying.
Ensure your deck is clean and ready to go with Feast Watson Woodclean.
Sand the surface lightly to remove any grain raise for the best results for your deck. And remember, remove any leftover dust before coating!

Weathered Timber

Ensure your deck is clean and ready to go with Feast Watson Woodclean.
For best results, sand your timber slightly to remove and deteriorations. Make sure to remove all leftover sand before coasting!

Previously Coated Timber

If your deck already has a stain or oil, don't worry. Check if your surface is ready by sprinkling water onto your deck:

If the water absorbs - you're good to go!
If the water beads, you may need to let your deck further weather, or require you to either sand or strip your deck.

Painted or Varnished Surfaces:

Before coating, you must bring your timber back to bare timber by stripping or sanding your deck.
Clear away any sanding dust before proceeding.

How to apply Wet Look Decking Oil to your deck:

Before you get started, you need to ensure the following:

Your timber is completely dry before applying the Wet Look Decking Oil.
The Wet Look Decking Oil is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
If you are coating a large space and need more than one Wet Look Decking Oil, mix both cans together in a large container.
Make sure you only use the best tools such as a quality synthetic or pure bristle brush or lambswool applicator. Please don’t use a roller! We only want the best for your deck.

Alright, now take your product and your brush and let’s apply your timber oil:

Apply your first coat of Wet Look Decking by walking along 3-4 planks at a time, in the same direction as the grain of the deck.
Don’t forget about your edges! They need to be fully coated.

Note: You don’t have to be cautious about how much to use – the more the merrier!

Leave your deck to dry for 4 hours. Go make yourself a cup of tea, put your feet up, and read a book.
Once you have finished a few chapters, apply a second coat as above.
If your timber is in direct sun exposure, around pools or in humid areas, we recommend a third coat.

If you want the best 'Wet-Look' for your deck, apply three coats. A third coat will increase the Gloss Level of your finish.

How to I maintain my deck after using the Wet Look Decking Oil?

Regular check on the coated timber to look for any colour loss, dryness, or weathering.
If this occurs, recoat the timber and it will return to its original glossy beauty.
If you recoat, don’t forget to clean your deck first using Woodclean!

Woodclean

A powerful oxalic acid based clearner to remove oil, mould, stains and tannins from outdoor timber.

PREPARATION