How to apply Wet Look Decking Oil to your deck:

Before you get started, you need to ensure the following:

1. Your timber is completely dry before applying the Wet Look Decking Oil.
2. The Wet Look Decking Oil is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
3. If you are coating a large space and need more than one Wet Look Decking Oil, mix both cans together in a large container.
4. Make sure you only use the best tools such as a quality synthetic or pure bristle brush or lambswool applicator. Please don’t use a roller! We only want the best for your deck.

Alright, now take your product and your brush and let’s apply your timber oil:

1. Apply your first coat of Wet Look Decking by walking along 3-4 planks at a time, in the same direction as the grain of the deck.
2. Don’t forget about your edges! They need to be fully coated.
• Note: You don’t have to be cautious about how much to use – the more the merrier!
3. Leave your deck to dry for 4 hours. Go make yourself a cup of tea, put your feet up, and read a book.
4. Once you have finished a few chapters, apply a second coat as above.
5. If your timber is in direct sun exposure, around pools or in humid areas, we recommend a third coat.
• If you want the best 'Wet-Look' for your deck, apply three coats. A third coat will increase the Gloss Level of your finish.

How to I maintain my deck after using the Wet Look Decking Oil?

1. Regular check on the coated timber to look for any colour loss, dryness, or weathering.
2. If this occurs, recoat the timber and it will return to its original glossy beauty.
3. If you recoat, don’t forget to clean your deck first using Woodclean!